Shanghai Rotorcomp Screw Compressor Co., Ltd
Shanghai Rotorcomp Screw Compressor Co., Ltd You Value Excellent Service &Products, We're Always There!
Add to Cart
1. World-leading Made in Germany Rotorcomp screw air end
2. 5 years warranty
3. Extraordinary cooling system design
4. Intelligent control system
5. higher efficient energy-saving motor in IP55 IE3 CE&MEPS, SF1.2
6. Unique driving guard system
7. ISO,TUV,GA,SGS certificates
Advantages of our new EVO-technology
New ROLLING PROFILE- ultimate efficiency with
reduced noise
Long life cycle due to increased bearing dimensions
and wear-free ROLLING PROFILE
Wide operating pressure range from 5 to 15 barg
High quality manufacturing and assembling
Made in Germany
Quality assurance ?bench test of every air end
before leaving our factory
Easy application selection with our new
ROTORCOMP SIZING AIR software
Highest flexibility for your package design
Suitable for all types of drive driving motors
Drive options: Belt drive, direct drive, internal gear drive
Base and face-flange mounting
All the electronic components are brand products of leading manufacturers. rives and electrics. The Air end of our LGFD rotary screw compressor-made in Germany. The centrepiece of the compressor is the air end, which is constructed and manufactured with the most modern production methods in Germany. The optimal air end for your compressor can be used on a modulating basis. In frequency-controlled units, where the operating pressure changes, adjustments can also be made on the frequency controller to optimally adjust the speed of the compressor to the compressor performance.
The working process of the worm compressor: the motor transmits the power to the worm shaft by a coupling or a belt, and the worm drives the star gear to move relatively in the worm groove, the volume of the closed element changes, the gas, the conveying compression, when the design is reached The pressure value is discharged into the oil separator by a symmetrical triangular exhaust port on the left and right sides of the main body casing.
45KW air cooling compressor parameters
| ITEM | UNIT | MODEL | ||||
| LGFD-45 | ||||||
| Free air delivery | m3/min | 7.60 | 7.0 | 5.8 | 5.0 | |
| Max. working pressure | MPa | 0.8 | 1.0 | 1.3 | 1.5 | |
| Compressor type | Oil inject screw compressor | |||||
| Cooling type | Air cooling | |||||
| Driven type | Belt driven | |||||
| Inlet status | Temperature | ℃ | ≤55 | |||
| Pressure | MPa | Atmospheric pressure | ||||
| Relative humidity | ≤90% | |||||
| Noise Level | dB(A) | ≤72 | ||||
| Residual oil content | ppm | ≤1 | ||||
| Drive rotor speed | rpm | 5500 | 5000 | 4450 | 4000 | |
| Compressed air outlet temperature | ℃ | Ambient temperature＋10 | ||||
| Cooling air flow | m3/hr | 10200 | ||||
| Control mode | Intelligent controller | |||||
| Safety valve set pressure | MPa | 0.88 | 1.10 | 1.43 | 1.60 | |
| Lubricating oil volume | L | 30 | ||||
| Lubricating oil brand | ROTORCOMP | |||||
| Compressed air outlet connection | G1-1/4 | |||||
| Dimension | L | mm | 1500 | |||
| W | mm | 1000 | ||||
| H | mm | 1320 | ||||
| Net Weight | kg | 1280 | ||||
| Motor | Model | Y2200L1-2 | ||||
| Speed | rpm | 2950 | ||||
| Rated Power | KW | 45 | ||||
| Service factor | 1.2 | |||||
| Protection type | IP55 | |||||
| Insulation class | F | |||||
| Startup mode | ʏ-Δ starting | |||||
| Voltage | V | 380(Special on request) | ||||
| Frequency | Hz | 50(Special on request) | ||||
| Rated current | A | 84 | ||||
| Weight of motor | kg | 312 | ||||
| Note: |
| 1. The above parameters and color are designed according to customer needs, the parameters are for reference only, the final parameters of the drawings shall prevail; |
| 2. According to user requirements and needs, to join way: air/water cooling, oil content, weight, appearance size according to the need to design, to the final order and the technical agreement shall prevail; |
| 3. Frequency converters (optional). 4. 1 years warranty, 5 years warranty for air end |